Route 66 Sign – Rust Effect

£40.00

Route 66 Sign – Rust Effect

 

Dimensions:

H: 318mm

W: 310mm

Description

To order, please contact us.

 

Made from 1.5mm mild steel. Other sizes available upon request.

We offer a variety of finishes, such as:

  • bare metal
  • clear coated industrial ground
  • 2-pack hardened epoxy paint, any colour
  • activated rust finish (in which the piece is rusted, cleaned, and sealed with a clear lacquer to preserve the rust effect)

We also offer stainless steel, which can be finished with a metallic brush-polished finish, or can also be painted any colour using our 2-pack hardened epoxy paint. (Stainless steel is available at an additional cost, contact us for further details)

For exterior use, we recommend choosing external grade stainless steel in order to protect against rust. Solely painted using 2-pack paint is not a guarantee against any weathering. However, if wanting an antique rust finish, it can be made from mild steel. Stainless steel isn’t necessary, as the piece will preserve its current level of rust for a while before eventually weathering further.

We typically incorporate screw holes into the art for it to be wall-fastened. Screws will also be supplied, with the heads painted to match and blend in with the piece. If you’d like your piece to stand off the wall, we can supply tube spacers as an extra; this will also allow lighting to be fitted behind the artwork.

Alternatively, screw holes can be omitted altogether in favour of push fit fixings which would be bonded to the back of the piece. This option comes with a full-scale template drawing with markings, which is then offered up to the wall in order to pre-drill the holes accordingly. (Available at an additional cost, contact us for further details)

Go to Top